Advertising [AfterProductThumbs]
100% reliable payment methods
Based on existing stock
For your convenience
Accessories and Parts:
Necessary Accessories
Bateria de Lipo 7,4V 50C 4000mah Hardcase (T-Plug) |
Bateria de Lipo 7,4V 50C 4000mah Hardcase (T-Plug) |
|
Bateria de Lipo 7,4V 50C 5000mah Hardcase (T-Plug) |
Bateria de Lipo 7,4V 50C 5000mah Hardcase (T-Plug) |
|
GENS ACE G-TECH SOARING 1300 mAh 7.4V 30C 2S1P WITH XT60 |
Bateria Lipo Power Tank 7,4V-60C 7100mAh (T-Plug) |
|
Carregador APC-1 10AMP |
|
|
Carregador Robitronic Expert LD 60 LiPo 2-4s 6A 60W |
Carregador Robitronic Expert LD 60 LiPo 2-4s 6A 60W |
|
CHARGER CUBE 2.0 |
|
|
HPI PLAZMA 7.4V 5300MAH 40C LIPO HARD CASE STICK PACK |
HPI PLAZMA 7.4V 5300MAH 40C LIPO HARD CASE STICK PACK |
|
HPI Reactor 200 Charger (EU 2 Pin) |
|
|
Pilhas alcalinas AA 1.5V (4) |
|
|
SkyRC S65 AC LiPo 2-4s 6A 65W Discharger 2A 10W |
SkyRC S65 AC LiPo 2-4s 6A 65W Discharger 2A 10W |
|
SkyRC T100 AC DUO LiPo 2-4s 5A 2x50W Charger |
SkyRC T100 AC DUO LiPo 2-4s 5A 2x50W Charger |
Spare Parts
10T Bullet Flux Pinion
|
|
|
12T Bullet Flux Pinion
|
|
|
3*25MM FRONT OUTER SUSPENSION SHAFT (2PCS)
|
3*25MM FRONT OUTER SUSPENSION SHAFT (2PCS) |
|
3*35.3MM REAR OUTER SUSPENSION SHAFT (2PCS)
|
3*35.3MM REAR OUTER SUSPENSION SHAFT (2PCS) |
|
3*51.8mm FRONT INNER SUSPENSION SHAFT (2pcs)
|
3*51.8mm FRONT INNER SUSPENSION SHAFT (2pcs) |
|
3*56.3mm REAR INNER SUSPENSION SHAFT (2pcs)
|
3*56.3mm REAR INNER SUSPENSION SHAFT (2pcs) |
|
3X14mm Screws
|
|
|
54T SPUR GEAR MT/ST
|
|
|
8T BULLET FLUX PINION
|
|
|
ALUM.CNC FRONT ANTI-BENDING PLATE SET
|
ALUM.CNC FRONT ANTI-BENDING PLATE SET |
|
ALUMINUM C HUB SET (HARD ANODIZED)
|
ALUMINUM C HUB SET (HARD ANODIZED) |
|
ALUMINUM FRONT BRACE (HARD ANODIZED)
|
ALUMINUM FRONT BRACE (HARD ANODIZED) |
|
ALUMINUM FRONT UPPER BRACE (HARD ANODIZED)
|
ALUMINUM FRONT UPPER BRACE (HARD ANODIZED) |
|
ALUMINUM KNUCKLE SET (HARD ANODIZED)
|
ALUMINUM KNUCKLE SET (HARD ANODIZED) |
|
ALUMINUM REAR BRACE (HARD ANODIZED)
|
ALUMINUM REAR BRACE (HARD ANODIZED) |
|
ALUMINUM REAR HUB CARRIER SET (0 DEG/HARD ANODIZE)
|
ALUMINUM REAR HUB CARRIER SET (0 DEG/HARD ANODIZE) |
|
AXLE 5x40mm (2pcs)
|
|
|
BALL 5.8x5mm (5pcs)
|
|
|
BALL 5.8x6mm (4pcs)
|
|
|
BALL STUD 4.8x12mm (10pcs)
|
|
|
BEVEL GEAR 13T
|
|
|
BEVEL GEAR 40T
|
|
|
BODY MOUNT SET
|
|
|
BULLET 3.0 CVD SHAFT SET
|
|
|
Bullet Flux ESC plate and steering bellcrank
|
Bullet Flux ESC plate and steering bellcrank |
|
BULLET MT TYRES (2PCS)
|
|
|
BULLET MT WHEELS
|
|
|
BULLET ST AMMUNITION TYRES (2PCS)
|
BULLET ST AMMUNITION TYRES (2PCS) |
|
BULLET ST WHEELS (2PCS)
|
|
|
BUTTON HEAD SCREW M2.6X14MM
|
|
|
CENTER BULKHEAD BULLET FLUX
|
|
|
CENTER DIFF HOUSING SET
|
|
|
CENTRE TOP DECK BULLET FLUX
|
|
|
CHASSIS BRACE SET
|
|
|
CHASSIS BULLET FLUX
|
|
|
CHAVE DA MOLA DE ESCAPE PRO-SERIES TOOLS |
CHAVE DA MOLA DE ESCAPE PRO-SERIES TOOLS |
|
CHAVE DE ESTRELA PRO-SERIES TOOLS 4MM
|
CHAVE DE ESTRELA PRO-SERIES TOOLS 4MM |
|
CHAVE DE ESTRELA PRO-SERIES TOOLS 6MM
|
CHAVE DE ESTRELA PRO-SERIES TOOLS 6MM |
|
Chave de Fendas 3X150MM (PRO-SERIES)
|
Chave de Fendas 3X150MM (PRO-SERIES) |
|
CHAVE DE FENDAS PRO-SERIES TOOLS 4X100MM
|
CHAVE DE FENDAS PRO-SERIES TOOLS 4X100MM |
|
Chave Porcas 7.0mm (PRO-SERIES) |
Chave Porcas 7.0mm (PRO-SERIES) |
|
Chave Umbrako 2.0mm (PRO-SERIES)
|
Chave Umbrako 2.0mm (PRO-SERIES) |
|
Chave Umbrako 2.5mm (PRO-SERIES)
|
Chave Umbrako 2.5mm (PRO-SERIES) |
|
Chave Umbrako 3.0mm (PRO-SERIES)
|
Chave Umbrako 3.0mm (PRO-SERIES) |
|
Chave Umbrako 4.0mm (PRO-SERIES)
|
Chave Umbrako 4.0mm (PRO-SERIES) |
|
Chave Umbrako 5.0mm (PRO-SERIES)
|
Chave Umbrako 5.0mm (PRO-SERIES) |
|
CUP JOINT (F) 4.5X18.5MM
|
|
|
CUP JOINT (R)4.5X18MM
|
|
|
DIFF CASE 5x25x16.5mm
|
|
|
DIFF CASE GASKET (3pcs)
|
|
|
DIFF GEAR SET
|
|
|
DIFF SHAFT 5x23.5mm (2pcs) |
|
|
DIFF SHAFT SET
|
|
|
DIFFERENTIAL CASE BULLET
|
|
|
DRIVE SHAFT 6x72mm
|
|
|
DRIVE SHAFT 6X83MM
|
|
|
E CLIP E2.5mm (20pcs) |
|
|
E CLIP E2mm (20pcs)
|
|
|
FLANGE PIPE (4pcs)
|
|
|
FRONT BUMPER SET
|
|
|
FRONT HUB CARRIERS (LEFT/RIGHT 10 DEGREES)
|
FRONT HUB CARRIERS (LEFT/RIGHT 10 DEGREES) |
|
FRONT LOWER ARM BRACE (ORANGE)
|
FRONT LOWER ARM BRACE (ORANGE) |
|
GEAR SHAFT 5x29mm (2pcs)
|
|
|
GEARBOX SPACER SET
|
|
|
HD AXLE 5X40MM
|
|
|
HD DIFF SHAFT 5X23.5MM
|
|
|
HD GEAR SHAFT 5X29MM
|
|
|
HEAVY DUTY DRIVE SHAFT 6X84mm
|
|
|
LOCK NUT M6 THIN TYPE (5pcs)
|
|
|
O-RING P-3 (BLACK /4pcs)
|
|
|
O-RING P-5 (4 pcs)
|
|
|
PAN HEAD SCREW M5x8mm (HEX SOCKET/10pcs) |
PAN HEAD SCREW M5x8mm (HEX SOCKET/10pcs) |
|
PIN 1.7x11mm (10pcs)
|
|
|
PIN 2x8mm (12pcs)
|
|
|
REAR BUMPER SET
|
|
|
RF-41WP RECEIVER (2.4GHZ/3CH)
|
|
|
ROD END SET
|
|
|
Servo Saver Posts 5x35mm |
|
|
SERVO SAVER SET
|
|
|
SERVO TOP DECK BULLET FLUX
|
|
|
SHOCK BLADDER (4pcs)
|
|
|
SHOCK BODY SET (2SETS)
|
|
|
SHOCK PARTS SET
|
|
|
SHOCK SHAFT 3X52MM
|
|
|
SHOCK TOWER (2PCS) |
|
|
SLIPPER CLUTCH HUB (F)
|
|
|
SLIPPER CLUTCH HUB (R) |
|
|
SLIPPER CLUTCH PAD
|
|
|
SLIPPER CLUTCH SPRING 7X9X1.7MM 3COILS
|
SLIPPER CLUTCH SPRING 7X9X1.7MM 3COILS |
|
SLIPPER GEAR SHAFT 6X43.5MM
|
|
|
SPINDLE/REAR HUB CARRIER SET
|
|
|
SPRING 13.5X63X1.2MM 11COILS
|
|
|
SPRING WASHER 3x6mm (20pcs)
|
|
|
STAND OFF BALL 5.8x14mm (5pcs)
|
STAND OFF BALL 5.8x14mm (5pcs) |
|
STEERING CRANK SET
|
|
|
STEERING NUT 3mm (4pcs)
|
|
|
SUPPORT PARTS SET
|
|
|
SUSPENSION ARM SET
|
|
|
TP. BUTTON HEAD SCREW M2.6*14MM
|
TP. BUTTON HEAD SCREW M2.6*14MM |
|
TP. BUTTON HEAD SCREW M3*19MM
|
|
|
TP. BUTTON HEAD SCREW M3x10mm (10pcs)
|
TP. BUTTON HEAD SCREW M3x10mm (10pcs) |
|
TP. BUTTON HEAD SCREW M3x12mm (6pcs)
|
TP. BUTTON HEAD SCREW M3x12mm (6pcs) |
|
TP. BUTTON HEAD SCREW M3x15mm (10pcs)
|
TP. BUTTON HEAD SCREW M3x15mm (10pcs) |
|
TP. BUTTON HEAD SCREW M3x28mm (10pcs)
|
TP. BUTTON HEAD SCREW M3x28mm (10pcs) |
|
TP. FLAT HEAD SCREW M2.6X12MM (12PCS)
|
TP. FLAT HEAD SCREW M2.6X12MM (12PCS) |
|
TP. FLAT HEAD SCREW M3*14MM
|
|
|
TP. FLAT HEAD SCREW M3x15mm (12pcs)
|
TP. FLAT HEAD SCREW M3x15mm (12pcs) |
|
TURNBUCKLE M3.5X25MM
|
|
|
TURNBUCKLE M3.5X53MM
|
|
|
Wheel Lower Brace, Orange
|
|
|
WHEEL SPACER SET (4pcs)
|
|
BULLET ST FLUX RTR 1/10 (2.4GHZ)
HPI-110662
Now featuring a waterproof receiver and battery compartment and waterproof servos, the Bullet ST Flux is truly a go-anywhere machine!
This Bullet is a 1/10th scale truggy fitted with a powerful 4WD drivetrain and a super-powerful HPI Flux Brushless System featuring waterproof electronics and Li-Po cutoff, so it can power through all sorts of terrain and fly over any obstacles! Now fitted with a versatile and comfortable HPI 2.4GHz radio system, its easier than ever to control the speed of the Bullet!
The Bullet ST Flux is based around a durable 4WD shaft drivetrain, 2 shocks per wheel and double-deck aluminium chassis. The Bullet Flux off-road truggy features the silent Flux brushless system. The incredible power from the Flux motor gives the lightweight Bullet Flux trucks an immense power-to-weight ratio for ripping acceleration and blinding top speed!
The Bullet can handle up to 7 NiMH cells or 3S LiPo batteries to give the truck insane top speeds and amazing acceleration! Do you want on-demand wheelies?
Go on, give it a try - you know you want to!
Features:
Factory-assembled & pre-painted electric-powered 4WD Truggy
2.4 GHz radio system for crystal-free, comfortable control
Waterproof receiver/battery box
Strong and powerful HPI Flux MMH-4000kv brushless motor
Waterproof HPI Flux EMH-3S speed controller
Waterproof steering servo
Includes AA batteries for transmitter
Covered air filter keeps water away from the air intake
Painted and detailed bodyshell ready to strut its stuff!
6061 aluminium chassis provides the ideal backbone
Tough bumpers combine with skid plates to protect all 4 corners
8 oil-filled shocks provide a plush ride
Extra-long suspension arms provide stability and balance
Proven racing design throughout
Steel turnbuckle links allow you to custom-tune the ride
Sealed shaft drivetrain is maintenance-free and super strong
Double-pad slipper clutch design for extra drivetrain protection
Reliable disk brake with adjustable linkage
All-terrain tyres look fantastic on black chrome wheels
Intelligent fuel line routing to keep things neat and tidy
A smart metal washer prevents over-tightening of wheel nuts
Aluminium center brace for more durability over plastic brace
Additional track-tuning options included in the kit!
Specification:
Length: 417mm
Width: 336mm
Height: 160mm (Adjustable)
- Wheelbase: 272mm
⚠️ In this space you will learn how to buy the items you need in our online store.
➠ Meaning of the indication in the availability of the products:
- Items with indication In Stock are available in existing quantities for immediate dispatch after payment is made, unless stocks are out of stock.
- Items with indication Last items in stock are available less than 2 existing units for immediate dispatch after payment is made, unless stocks are out of stock.
- Items with indication Out-of-Stock is allowed to make the purchase and their availability depends on our suppliers. The ideal would be to confirm availability through our contacts before making your purchase.
➠ For more information on how to buy here: Link to How to Buy.
➠ For more information about payment and shipping methods, see here: Link to Payments and Shipping.
Manufacturer Information
The name, address and contact details of the product manufacturer.
Jegindøvej 21
DK - 8800 Viborg
Denmark
Responsible in the EU
The name, address and contact details of the EU based person responsible for ensuring product compliance.
Jegindøvej 21
DK - 8800 Viborg
Denmark
Security Information
Important warnings for safe use of the product.
⚠️ Product not suitable for children under 14 years of age without supervision by a responsible adult during use and maintenance. Keep out of the reach of small children as it contains small parts.
Write your review
- Review sent
- Your comment has been submitted and will be available once approved by a moderator.
- Your review cannot be sent
feedback Report comment